Amplicomms TCL 350 Mode D'emploi page 21

Radio controlled time signal reception
After your clock is powered up, it starts to receive radio
controlled time signal with dimmed backlight. The
flashes.
• Receiving signal (
• Successful reception (
• Failed reception (
Automatic reception and manual reception
Automatic reception
Your clock starts automatic reception everyday at 1:00, 2:00,
and 3:00. If it fails to receive the radio controlled time time
signal at 3:00, it will start reception at 4:00. If it fails again, it
will start reception at 5:00. If it fails again, it will start automatic
reception at 1:00 again in the next day.
When your clock is receiving the radio controlled time signal,
the display backlight will turn dim. It will resume to the
preceding brightness level after the radio controlled time
reception is completed. During reception, all buttons do not
function except the
Manual reception
Simply press and hold WAVE/M to enter manual setting
mode.
18
indicator disappear).
Helpline UK 0844 800 6503
(See chapter "Helpline" for costs and hours of operation)
indicator flashing)
indicator becomes static)
button.
indicator