Initial Connection - Sartorius YCC01-USBM2 Notice D'installation

Initial Connection

Installing the Drivers for the USB Interface
1. Place the enclosed CD in your computer's CD-ROM drive.
2. Each version of Windows
procedures for uploading the driver from the CD.
All versions have a Wizard for adding and removing
hardware, which guides you through the process.
3. After you click on "Finish" at the end of the process,
the virtual port should be ready to operate.
®
Windows usually adds the virtual port in the position
following your highest-numbered COM port. For example,
on a PC with 4 COM ports, the virtual interface is added
as COM5 (shown in the Device Manager).
®
may have slightly different
5