Installation Steps - ClearSounds Amplified Spirit Phone Manuel D'utilisation

█ INSTALLATION STEPS

Installation of your ClearSounds
is easy. There are some basic steps you need to take
™
Phone
when you set-up your phone for the first time.
1. Check parts list
2. Pre-select auxiliary features:
a. AMPLIFICATION: Amplify Override ON / OFF
b. RINGER: High, Low or Off
3. Installation
If at any time you have questions about your telephone
after reading this manual, please contact our ClearSounds
Customer Service Department at 1-800-965-9043.
1. PARTS CHECKLIST
Check the contents of the box - The CSC500 should contain:
1. Handset and handset cord
2. Phone base
3. Telephone line cords (one 6 inch and one 6 ft cord)
4. Wall plate adapter
5. User's Manual
6. Photo Template
2. PRE-SELECT AUXILIARY FEATURES: If you plan on
mounting your phone on the wall, you may want to consider
setting up the Amplification Override Switch (page 9-10) and
Ringer Switch (pages 10).
3. PHONE INSTALLATION
The phone should be located in an area where it is easy to
see the lighted ringer and choose an area near a telephone
wall jack (RJ11C). The telephone may be placed on a shelf or
table or may be fixed to the wall using the wall plate adapter
(mounting bracket).
phone should not be located near electronic equipment, such
as personal computers, television or microwave ovens.
® CSC500 Amplified Spirit
To avoid potential interference, the
7 – ENGLISH
®