Safety Warnings; How Does Marmitek X-10 Work - Marmitek LW11G Guide Utilisateur

LW11G™ WALL MOUNTED DIMMER

SAFETY WARNINGS

• The wiring of your electrical installation is live (230 V) and extremely dangerous.
Never connect the module when plugged into the mains. Always turn off the main
switch before starting the installation.
• This product is for professional use and should be installed by a certified installer.
• To prevent short circuits, this product should only be used inside and only in dry
spaces. Do not expose the components to rain or moisture. Do not use the product
close to a bath, swimming pool etc.
• Do not expose the components of your systems to extremely high temperatures or
bright light sources.
• Do not open the product: the device may contain live parts. The product should only
be repaired or serviced by a qualified repairman.
• In case of improper usage or if you have opened, altered and repaired the product
yourself, all guarantees expire. Marmitek does not accept responsibility in the case
of improper usage of the product or when the product is used for purposes other
than specified. Marmitek does not accept responsibility for additional damage other
than covered by the legal product responsibility.
• This product is not a toy. Keep out of reach of children.
• Adapters: Only connect the adapter to the mains after checking whether the mains
voltage is the same as the values on the identification tags. Never connect an
adapter or power cord when it is damaged. In that case, contact your supplier.
• Automatic switching devices provide comfort, but can also be dangerous. They can
surprise people or can ignite clothing hanging over an electric heat source. Please be
careful and take appropriate measures to avoid accidents.

HOW DOES MARMITEK X-10 WORK?

Marmitek X-10 components use the existing mains wiring to communicate (using
Marmitek X-10 signals). You can build a complete system using the three different kind
of components of the Marmitek X-10 System:
1. Modules - These components will receive Marmitek X-10 signals and will switch or
dim the attached lamp or appliance.
2. Controllers - These components will transmit Marmitek X-10 signals and thus will
control the Modules.
3. Transmitters - Wireless components like remotes. The signals of these components
will be received by a controller with transceiver functionality (IRRF 7243, TM13 or con-
sole of a Marmitek Security System).
LW11
™
3