Camera Setup; Motion Setup - LOREX Technology L15LD420 Série Manuel D'instructions

Configuration

CAMERA SETUP

[CHANNEL]:
Select the camera to be adjusted.
TITLE: camera name, max. 8 characters.
BRIGHTNESS: Adjust image brightness (-32~31).
CONTRAST: Adjust color contrast (-32~31).
SATURATION: Adjust color saturation (-32~31).
HUE: Adjust color hue(-32~31).
HORIZONTAL POSITION: Adjust camera display
horizontal position.
LIVE DISPLAY: Set up the channel to be displayed
or not at the LIVE screen.

MOTION SETUP

[CHANNEL]
Select the channel to be adjusted.
[SENSITIVITY]
Adjust motion detection sensitivity. 1 (LOW) ~ 7
(VERY HIGH)
[DURATION]
The recording period after last motion detected.
For example, the duration is set to 10 seconds and
the motion last for 3 minutes. The DVR records for 3
minutes and 10 seconds.
[SIZE]
Select the CELL SIZE for Blocked Area (RED).
DEFAULT : 2 cells
DETECT CELL NUMBER - Recording will only be
triggered when the cells in motion are MORE THAN
the number the user has set. The smaller the
number, the more sensitive the detection is.
MOTION MASK - Area detection setup - sets which
areas detect motion and which areas do not detect
motion.
The area that is not detecting motion is Grey.
RED block:no detection (mouse left click)
Transparent block:detection (mouse right click)
Motion can trigger relay output in motion record.
34