Zoom Mode; Ptz (Pan/Tilt/Zoom) & Focus Controls - LOREX Technology L15LD420 Série Manuel D'instructions

Zoom Mode

Displays a single camera in ZOOM Mode (200% Zoom). Select the channel to ZOOM, and press
the ZOOM button on the front panel of the System, or use the mouse to select the onscreen
ZOOM icon. The area of ZOOM can be moved using the front panel arrows, or by using the
Mouse.
PTZ (Pan/Tilt/Zoom) & Focus Controls
Enters PTZ control for a PTZ type camera installed on Channel 1. Press the P/T button on the
front panel of the System, or use the mouse to select the onscreen P/T icon. The PTZ Camera
can be moved using the Mouse. Refer to page 25 for PTZ setup instructions.
After entering the PTZ control mode, use the
mouse to control the camera. Direction icons
will appear in all corners of the screen.Clicking
on a directional arrow will select that direction
for movement.
Press the ZOOM Button on
the front panel.
Select ZOOM mode by using
the mouse to select the
ZOOM icon.
Press the P/T Button on the
front panel.
Select P/T mode by using the
mouse to select the P/T icon.
Display Modes
23