Setup Menu; Date Format Setup; Time Format Setup; Alarm Threshold Setup - REED R8008 Manuel D'utilisation

Setup Menu

You can adjust the following preferences in the Setup Menu:
• Date Format
• Time Format
• Alarm Threshold
• Pulse Sound
• Average Measurement Time
• Bluetooth Data Transmission

Date Format Setup

1. Press the Setup Button and press the Up or Down buttons to select
"DATE". Press the Enter Button to select the Date Format Setup.
2. Press the Up and Down Buttons to adjust the flashing value.
3. Press the Enter Button to proceed to the next value, and press the
ESC button to save your settings and exit to the Setup Menu.

Time Format Setup

1. Press the Setup Button and press the Up or Down buttons to select
"TIME". Press the Enter Button to select the Time Format Setup.
2. Press the Up and Down Buttons to adjust the flashing value.
3. Press the Enter Button to proceed to the next value, and press the
ESC button to save your settings and exit to the Setup Menu.

Alarm Threshold Setup

An alarm will sound when the measured value is greater than the Alarm
Threshold. The default is 205µSv/h.
1. Press the Setup Button and press the Up or Down buttons to select
"ALM". Press the Enter Button to select the Alarm Threshold Setup.
2. Press the Up and Down Buttons to adjust the flashing value.
3. Press the Enter Button to proceed to the next value, and press the
ESC button to save your settings and exit to the Setup Menu.
1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com
Pantone 534 Blue - 100/80/30/5
Pantone 485 Red - 10/100/100/5
Pantone 534 Blue
Pantone 123 Yellow
Pantone 485 Red
Pantone 123 Yellow
Pantone 534 Blue
reedinstruments
www
Black
REED Instruments
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
Rich Black -
20/20/20/100
Only if you REALLY need them:
9
com