Control Panel - Samsung DW80R2031 Serie Manuel D'utilisation

Masquer les pouces Voir aussi pour DW80R2031 Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

CONTROL PANEL

Power
1
Cycle Selector
2
Hi-Temp Steam
3
Wash
Sanitize
4
/
Heated Dry
5
(Control Lock)
Delay Start
6
Clean
7
1
When you press the Power button, the entire display turns on and off, and
then the light of the most recently f inished cycle lights up.
When the selected cycle is complete, the dishwasher powers off
automatically.
Select the appropriate wash cycle depending on the soil level of your
dishes. After you select a cycle, the Cycle On light for that cycle lights up.
If a proble
m
occurs during an operation,
the cause of the problem. The blinking is accompanied by a warning
tone. For more information, refer to "Information Codes" on page 26.
Raises the main wash temperature to improve cleaning for loads containing
tough, baked-on food.
Hi-Temp Steam Wash
The temperature rises to 15 °F (
8
temperature sanitization.
If you select the Sanitize option, the "Sanitize" lamp blinks when the water
temperature reaches the sanitary temperature (over 156 °F (69 °C)), and
then remains illuminated until the Sanitize option ends. When you press the
Power button, the "Sanitize" lamp turns off.
The Normal Cycle with the Sanitize option selected is NSF certified .
The Sanitize feature operates in accordance with NSF/ANSI Standard
184 for Residential Dishwashers. Certified residential dishwashers are
not intended for licensed food establishments.
When the "Heated Dry" function is selected,the heater will work during the
drying process.
Control Lock allows you to lock the buttons on the control panel so children
cannot accidently start the dishwasher by pressing the buttons on the
panel.
T o lock and unlock
the buttons on the control panel, hold the Heated Dry
button down for three (3) seconds when power is On.
Delay a cycle for 3 , , or 9 hours , The hour displayed indicates the time at which
6
the dishwasher will start.
Indicates that the operation is over and that your dishes are clean.
English - 7
2
3
4
specific LEDS blink, indicating
is not available for the
Express 60
°C) in the f inal rinse cycle for high
70
5
6
7
8
cycle.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Dw80 sérieDw80r2031us

Table des Matières