How To Operate The Fan - Sonnenkonig AIR FRESH 5 Mode D'emploi

6 How to operate the fan

1. Plug the plug into the mains socket and ensure that the indicator lamp lights up as
shown below.
2. Press the "ON/SPEED" button to adjust the blower speed (low, medium, high). The
lamps in the control panel light up accordingly.
3. Press the "WIND" (FAN) button to select the fan mode. The appropriate lamp lights up.
"Normal": Fan speed is based on low/medium/high speed.
"Natural": Imitates natural wind based on a high or low fan speed.
"Sleeping" (sleep mode): For the first half hour, a strong and low natural fan speed,
then a medium natural fan speed. In the second half hour until the end of the preset
time, change to a lower natural fan speed.
4. Press the "SWING" button to change the fan direction. The appropriate lamp lights
up. Press this button again to stop the swing movement.
5. Press the "MIST" button. The indicator lamp lights up and the humid mist is distrib-
uted by the front mist panel. You can press the "MIST" button separately or together
with the fan function to produce a cooling air flow. When the mist function is used
separately, it raises air humidity.
6. Press the "TIMER" button to set the fan time from 1 to 9 hours and switch the fan
off after the preset time. Press the button once to set a time of 1 hour; press it 9
times to set a runtime of 9 hours.
7. Press the "ION" button. The indicator lamp lights up. Negative ions produced by the
ionization function emerge from the appliance and ensure that dust, pollen, mould
fungus spores, scales etc. clump together and are removed from the air. You can
press the "ION" button separately or together with the fan function.
Note: After the negative ion function has run for a specific time, some dirt will
collect around the opening of the negative ion generator. This is an effect of the ions
and a totally normal phenomenon. You can clean the opening yourself.
73
E