Technical Data And Dimensions - Geoline 8388020 Mode D'emploi

to carry out extraordinary maintenance activities and repairs on this equipment.
SYMbOLS
Indicates the high probability of personal injury, if the associated
!
instructions and directions are not followed.
Indicates that goggles should be worn.
Indicates that a protective mask should be worn.
Indicates that protective gloves should be worn

TECHNICAL DATA AND DIMENSIONS

Model
No. of ways
Type
Voltage
Rated power
Current
Max operating pressure
Maximum flow-rate
Max operating temperature
Type of electrical connector
Weight
Liquid inlet connector
Liquid outlet connector
Features and technical data are for guidance. The manufacturer reserves the right to carry out any modifications to the
electrovalve that it deems necessary.
IDENTIFICATION OF COMPONENTS (FIG. 2)
1 valve body
3
pins for electrical connection
5 liquid outlet
UNPACKING
The electrovalve is supplied ready for installation, complete with the solenoid.
Check that the electrovalve is complete and intact.
INSTALLATION
Ideally the electrovalve should be installed with the solenoid on the top.
ELECTRICAL CONNECTION (FIG. 3)
- Check that the supply from the electrical system complies with the values stated in the TECHNICAL DATA table. Volt-
P/N 8388010
P/N 8388030
normally closed
12V
27 W
2,25 A
40 bar (580 p.s.i.)
80 l/min (21 US gpm)
+5°C ÷ +60°C
DIN 43650 A
0,95 kg
Quick Connector
G 1/2 F
2 solenoid
4
liquid inlet
6 connection pin protector cap
I n s t r u c t i o n
P/N 8388012 P/N 8388020
P/N 8388031 P/N 8388027
2
(±10%)
0,90 kg
G 1/2 F Quick Connector
G 1/2 F
m a n u a l
6
P/N 8388021
P/N 8388028
2
normally closed
12V (±10%)
10 W
0,9 A
20 bar (290 p.s.i.)
80 l/min (21 US gpm)
+5°C ÷ +60°C
DIN 43650 A
0,95 kg 0,90 kg
G 1/2 F
G 1/2 F G 1/2 F
ENG
9