Table Des Matières - activTek INDUCT 2000 Guide D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

CONGRATULATIONS . . .
on your purchase of an activTek INDUCT
750/2000 air purification enhancement system.
This unit is designed to be installed into an
existing HVAC system. Please read and follow
all service procedures outlined in this manual.
Use only genuine activTek replacement parts
available from your Distributor.
If you have any questions concerning this or any
activTek product, contact your Distributor.
Please record the name and phone number of
your activTek Distributor:
Name __________________________________
Phone _________________________________
Please record the serial number of your
activTek INDUCT 750/2000:
Serial # _________________________________
Features:
Ozone Production:
• 0.00 ppm with ozone free
replaceable ActivePure® Cell.
• 0.40 ppm maximum with ozone
replaceable ActivePure® Cell.
Electrical:
• 100/240 V ~ 50/60 HZ
• 0.17A 17 watts (INDUCT 750)
• 0.17A 19 watts (INDUCT 2000)
Mechanical:
• Distribution via air handler.
Dimensions:
• INDUCT 2000: 9.62" x 9.62" x 11.25"
(24 cm x 24 cm x 28.5 cm.)
• INDUCT 750: 9.62" x 9.62" x 7.48"
(24 cm x 24 cm x 19 cm.)
• Weight: 3 pounds (1.2 kg.)
Operating Temperature:
• < 200˚F
Coverage:
• INDUCT 2000: up to 2000 ft
• INDUCT 750: up to 750 ft
Warranty:
• Limited 3 year Warranty
2
CONTENTS
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
About activTek INDUCT 750/2000 . . . . . . . . . .2
Product Contents. . . . . . . . . . . . . . . . . . . . . . . . . .3
Installation Hardware. . . . . . . . . . . . . . . . . . . . . .3
Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . .3
Recommended Installation Tools. . . . . . . . . . .3
Installation Requirements. . . . . . . . . . . . . . . . . .4
Metal Ductwork Installation . . . . . . . . . . . . . . .5
Fiberglass Ductwork Installation . . . . . . . . . . .6
Maintenance/UV Lamp Indicator. . . . . . . . . 12
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Changing the ActivePure® Cell . . . . . . . . . . . 13
Changing the Ballast . . . . . . . . . . . . . . . . . . . . 14
This owner's manual is also available online at:
http://www.activTek.net.
activTek INDUCT 750/2000 is easily mounted
into the supply side of air conditioning and
heating system air ducts where many problems
can start.
Optional ozone units are available with the
same basic components as ozone free INDUCT
units and an ozone cell.
Note: Ozone units and ozone cells are not
available to California
(186 m
)
2
2
(229 m
)
2
2
WARNING! - UV Light in operation.
Disconnect unit from power supply before
servicing. Failure to follow warnings may
result in severe eye damage and electrical
shock.
Location for Protective Earth Line.
WARNING! - To prevent damage
to the unit, operating environment
temperature must never exceed 200˚F.
WARNING! - This unit must be installed
by a licensed HVAC contractor. Failure to
do so will void warranty of the product.
WARNING! - This unit must never be
used with an extension cord.

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Induct 750

Table des Matières