Assembly Instructions - Endless Summer GAD15255SP Manuel Du Propriétaire

Table des Matières

Publicité

Need help? 1.800.762.1142
Do not return to place of purchase.

Assembly Instructions

1
DO NOT RETURN TO PLACE OF PURCHASE.
For assistance, call 1.800.762.1142 toll-free . Please have
your owner's manual and model number available for
reference .
Note: The model number is printed on a label which can be found on
the inside door, back or side of the base assembly .
Assembly Tips:
1 . Select an area where you will assemble this product . To
protect components, choose a smooth surface that's free of
cracks or openings .
2 . Spread out all parts .
3 . Tighten all hardware connections by hand first . Then, before
completing each step, go back and fully tighten all hardware .
Be careful not to over-tighten . That could damage surfaces or
strip threads .
4 . For best results, complete each step in the order presented .
To complete assembly you will need:
• (1) Leak detection solution (instructions on how to make the
solution are included in the "Operating Instructions" section of
this manual) .
• (1) Precision-filled LP gas grill tank with Acme Type 1 external
threaded valve connection (standard grill size) (not included) .
Typical assembly is approximately one hour .
W CAUTION: Two (2) people will be required for
assembly.
3
Attach Side and Rear Panels
Note: Attach bottom screws before attaching top screws . Do not fully tighten screws
until step 4 .
A
x 12
Replacement Parts
1.800.762.1142
2
Attach Legs
Note: Do not fully tighten screws until step 4 .
B
x 4
4
Attach Base
Note: Tighten all screws from steps 2-4 .
A
x 4
5

Publicité

Table des Matières
loading

Table des Matières