Assembly Instructions - Endless Summer GAD1351SP Manuel D'utilisation

Need help? 1.800.762.1142
Do not return to place of purchase.

Assembly Instructions

1
DO NOT RETURN TO PLACE OF PURCHASE.
For assistance, call 1.800.762.1142 toll-free. Please have
your Owner's Manual and model number available for
reference.
Note: The model number is printed on a label which can be found on
the inside door, back or side of the base assembly.
Assembly Tips:
1. Select an area where you will assemble this product. To
protect components, choose a smooth non abrasive surface
that's free of cracks or openings.
2. Spread out all parts.
3. Tighten all hardware connections by hand first. Then, before
completing each step, go back and fully tighten all hardware.
Be careful not to over-tighten. That could damage surfaces or
strip threads.
4. For best results, complete each step in the order presented.
To complete assembly you will need:
• (1) Leak detection solution (instructions on how to make the
solution are included in the "Operating Instructions" section of
this manual).
• (1) Precision-filled LP gas grill tank with Acme Type 1 external
threaded valve connection (standard grill size) (not included).
Typical assembly is approximately one hour.
3
Attach Side Panels, Back Legs and Middle Support Leg
A
x 3
C
x 8
Replacement Parts
parts.BlueRhino.com
1.800.762.1142
2
Attach Bowl Assembly
Note: The control panel must line up with the two holes on the mantel frame.
A
x 5
4
Attach Side Panels, Left Front Leg and Middle
Support Leg
A
x 2
5
C
x 8