Abicor Binzel ABICUT 155 Mode D'emploi page 27

ABICUT 155
Standard values for cutting capacity
Material thickness
Low alloy steel
Stainless steel
Aluminium
Tab. 5 Standard values for cutting capacity
Standard length (other lengths available
on request)
Structure
Power/air cable connection
Version
Tab. 6 Cable assembly
3.2 Abbreviations
Plasma
ABICUT 155
ABICUT 155 MT
Tab. 7 Abbreviations and term definitions
The specifications on the cutting capacity are standard values only as they are
also greatly affected by the following factors: Type and quality of the material;
pressure and impurities in the compressed air; temperature of the workpiece to
be cut; desired cut quality; condition of the electrodes and cutting nozzle;
distance and position of cutting torch relative to the workpiece; power source
characteristics and cutting speed.
Ionised gas
Manual plasma cutting torch
Machine plasma cutting torch
ABICUT 155
50 (max. 55) at 150 A
35 (max. 45) at 120 A
40 (max. 45) at 150 A
30 (max. 40) at 120 A
35 (max. 40) at 150 A
25 (max. 35) at 120 A
ABICUT 155
6 m
Cable assembly
G1/4
Direct or central connector
3 Product description
EN - 7