Torin BIG RED T32001 Manuel Du Propriétaire page 8

8. Use two Bolts (No.15), Washers (No.17) and Nuts
(No.18) to connect the lower ends of the Supports
(No.16) to the inside of the base (No.6). Then use
Bolt (No.28), Washer (No.22) and Nut (No.18)
to connect the top ends of the Supports to the
post (No.21), check to make sure the nuts were
tightened, and tighten the nuts in step 6.
28
16
18
17
6
15
9. Use Bolt (No.30), Washer (No.31) and Nut (No.14)
to attach the Boom (No.33) to the top of the Post
(No.21) , tighten Nut (No.14) so that the boom
(No.33)can rotate freely, do not over tightened
boom needs to be able to rotate freely.
30
18
22
16
21
15
33
14
31
21
10. Use Bolt (No.20), Washer (No.22) and Nut
(No.18) to fasten the lower end of the Long
Ram (No.27) to the Post (No.21). Then use
Bolt (No.32), Washer (No.22) and Nut (No.18)
to fasten the top of the Long Ram to the Boom
(No.33).
20
11.Slide the Boom Extension (No.35) into the Boom
(No.33) and use Bolt (No.34), Washer (No.22)
and Nut (No.18) to secure at the desired load
rating. Use Bolt (No.36), Washer (No.8) and Nut
(No.7) to attach the Hook and Chain (No.37) to
the end of the Boom Extension. (The boom has
four different load ratings; select desired rating
before use.)
33
22
34
8
33
22
32
21
27
18
22
18
35
36
18
8
7
37