Torin BIG RED T32001 Manuel Du Propriétaire page 7

ASSEMBLY
1. Fasten the two larger rear caster wheels (No.1)
on the Base structure with Bolts, washers , spring
washers and nuts (Face bolts up when installing.)
2. Fasten the smaller two caster wheels (No.3)
on the Base structure with Bolts (No.4), spring
washers (No.5). (Face bolts up when installing.)
3. Fasten the remaining larger two caster wheels
(No.1) on the front legs (No.2) with bolts, washers,
spring washers and nuts.
4. Slide the legs (No.2) into front of the base (No.6).
6
2
5. Fasten the guide plates (No.12), to the base frame
(No.6) and front legs (No.2) with bolts (No.11),
washers (No.13) and nuts (No.14). Lift one side
of the base to align the hole on the frame to the
hole on each front leg (No.2), then insert the Ring
Pins (No.10) into the hole, and insert the Cotter-
Pin (No.9) into the hole of the Ring Pins.
6
11
10
6. Use Bolts (No.4) and Spring Washers (No.5) to
fasten the Handle (No.29) to the Post (No.21).
5
7. Use two Bolts (No.19), washers (No.8) and Nuts
(No.7) to connect the bottom of the Post (No.21)
to the Base Frame (No.6).
6
7
13
12
14
9
2
4
29
21
21
19
8
7