Bluetooth (Optional); Aux-In Operation - Bigben Interactive CD57 Manuel D'utilisation

REPEAT (REPEAT 1 , REPEAT ALL)
 2 Selective modes: Repeat 1 & Repeat All).
 During Repeat mode, the system repeats current track on CD.
 During Repeat All mode, the system repeats all tracks on CD; when it reaches end of final track, it will return
to the first track.

BLUETOOTH (OPTIONAL)

Bluetooth pairing
1. Before starting the pairing process, press FUNCTION to BT
2. Press button BT PAIR, until the bluetooth symbol appear in the display.
3. Switch on your mobile phone bluetooth then start searching to pair.
PROGRAM
Play FOR RADIO , CD & USB
Program entry available during "STOP" mode only. Please follow instruction below:
By pressing [PROGRAM] button, system displays PROG and track number flashes.
1.
By pressing [ SKIP UP] / [
2.
Press [PROGRAM] again to confirm, the system keeps that track number and goes to next program mode.
3.
The system can hold 20 programs for Radio, CD & 99 programs for USB. After the system registered with
4.
maximum programs, no further entry allowed.
If [STOP] button is pressed during program entry mode, the system removes the programmed contents
5.
and returns to stop mode.
If [PLAY/PAUSE] button is pressed when the system holds program content, it starts program play and the
6.
display shows PROG.
If [ SKIP UP] / [
7.
previous programmed track.
If [STOP] button is pressed during Program play, the system stop playing but keep the program content.
8.
Until [STOP] key is pressed again, the system removes program content and goes to stop mode.
Remark: Saving energy when the unit has no sound output about 30 minutes on CD
mode, USB mode and LINE IN mode, it will be switched to stand-by automatically. It
can be switched ON the unit by switching the Function selector again.

AUX-IN OPERATION

Plug 3.5mm audio cable (supplied) one end to the Aux in socket on the back of the unit, the other end to an
external sound source with a Line or Headphone analogue output to play through the unit's speakers.
While Aux-in function is being in use, CD player will be no function.
FM RADIO
1. Press "FUNCTION" BUTTON to FM
2. Press "AUTO SCAN" BUTTON 2 SECOND, it will auto store 20 FM channel. After store, skip up / down FM
station as desire. Also it can be used manual tuning control as shown unit drawing 14.
SPECIFICATION
Power Supply
Power Consumption : 13W
Radio Section
DC:
SKIP DOWN] button, you can choose desired track number to program.
SKIP DOWN] button is pressed during the program play, the system skips to next /
: AC 230V ~ 50 Hz
: FM 87.5 – 108 MHz
6 x 1.5V, UM-2, "C" size , R14
5