Boost PORT-TFT12 Mode D'emploi page 6

VIDEO OUT (7)
Connect an RCA video lead to this socket and to the RCA input socket of your TV set, video projector, etc.
BLUETOOTH OPERATION
1. Turn on the unit and press the input selector button on the unit to select the Bluetooth function.
2. Activate the Bluetooth feature on the external device to be paired.
3. Initiate a search for devices. The device shows up as "BOOST-PORT-TFT12".
4. Press the  button to start playing and the buttons  and  for the selection of songs.
SPECIFICATIONS
RMS/max power. ..........................................................................................................................400W/800W
Woofer .............................................................................................................................................12"/30cm
Battery ................................................................................................................................12V 5Ah lead-acid
Operating time .................................................................................................................................... 4 hours
TFT screen .................................................................................................................................................15"
UHF mic frequency ............................................................................................................. 863.2 & 864.8MHz
Max. RF transmission power .............................................................................................................. 4.29mW
Transmission distance of UHF mics ........................................ 50-60m in open environment, 25-30m indoors
BT frequency band .................................................................................................................. 2402-2480MHz
Max RF transmission power ............................................................................................................... 2.4 dBm
Power supply .................................................................................................................................... 15V
Dimensions ..................................................................................................................... 410 x 370 x 650mm
Weight ..................................................................................................................................................... 12kg
TROUBLE SHOOTING
If a problem occurs, follow the steps in the table below. If problem still can't be solved, please contact your
retailer.
PROBLEM
No sound when
power on
No sound from the
microphone
No sound after
inserting USB/TF
card
If Speaker makes
loud noises
This marking indicates that this product should not be disposed with other household wastes throughout the
EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return your used device, please use the
return and collection systems or contact the retailer where the product was purchased. They can take this
product for environmental safe recycling.
6 6
POSSIBLE CAUSE
1. No input source
2. Volume down
1. Bad mic connection
2. Mic not switched on
3. Mic volume down
1. Incorrect file format
2. Bad connection of USB/TF card
3. The USB/TF is plugged into the front-
mounted inputs
1. Microphone switched on but may be
too close to the speaker
2. Microphone switched on but is not
being used.
3. Microphone volume may be too loud
4. Mobile phone is being used too close
to the speaker
5. Other wireless equipment may be
placed very close to the speaker.
SOLUTION
1. Connect an AUX signal, USB, TF or Bluetooth
source
2. Adjust volume
1. Plug in the mic properly
2. Switch mic on
3. Increase mic volume
1. File format should be MP3
2. Plug in USB/TF card properly
3. Switch on the MP5 POWER switch on the rear
panel
1. Keep the microphone 2 meters away from
the speaker
2. Turn off microphone if not in use.
3. Adjust microphone volume to lower mode
4. Keep mobile away from the speaker whilst
attending a call.
5. Keep the speaker away from other wireless
equipment
EN
2A