Grundig HS 6280 Mode D'emploi page 14

OPERATION ______________________________
Settings
Your appliance has the following settings:
Temperature level/blower level
– 0 : Off
– 1 : Gentle air flow and moderate temperature
for gently drying and styling
– 2 : Strong air flow, high temperature for quick
drying and styling
Cool shot
D
– ❄: Interrupts heating and provides a cool air
flow
Changing the styling attachments
1 D etach the attached styling attachment
by pressing on the catch (on the back of the
appliance) and turning the hot air brush
C
slightly to the right.
2
P lace another styling attachment on so that the
recess and the catch
appliance) are in line and turn slightly to the
left until it clicks.
Notes
The size of curls depends on the diameter of
█
the styling attachment: see "Special features".
All three thermo brushes have a roll out
█
function.
Operation
Check if the mains voltage on the type plate (on
the handle of the device) corresponds to your
local mains supply.
1 T horoughly towel dry your hair after washing.
2 P lug the power cord
3
T urn on the appliance with the switch
set the required temperature level/blower
level.
4
I f necessary, interrupt heating by pressing and
holding down the button (Cool Shot).
D
5
A fter rolling in the hair section allow the heat
to set for few seconds.
14 ENGLISH
E
(on the back of the
C
into the wall socket.
I
and
E
6 U nroll your hair section by press ing the roll-out
button .
B
– This releases the brush and it can be rolled
out of the curled section.
Note
Cool Shot interrupts heating and provides
█
a cool air flow. This allows you to fix your
hairstyle better and more lastingly.
7
A fter use, switch off the appliance with
switch and pull the plug of the mains cable
out of the socket.
Note
Never wind the mains cable around the
█
appliance, because this can cause damage.
A
Please check the appliance and the cable
regularly for visible damage.
the
E
I