26
INSTALLATION
10
TURN THE WATER ON AT THE SHUTOFF
VALVE
Tighten any connections that leak.
CAUTION
Check to see if leaks occur at the water
line connections.
11
PLUG IN THE REFRIGERATOR
Arrange the coil of tubing so that it does not
vibrate against the back of the refrigerator or
against the wall. Push the refrigerator back to
the wall.
12
START THE ICEMAKER
Set the icemaker power switch to the ON
position.
The icemaker will not begin to operate until
it reaches its operating temperature of 15°F
(–9°C) or below. It will then begin operation
automatically if the icemaker power switch is
in the ON (I) position.
Turning On The Power
Plug in the refrigerator.
CAUTION
Connect to a rated power outlet.
Have a certified electrician check the wall
outlet and wiring for proper grounding.
Do not damage or cut off the ground
terminal of the power plug.