bem wireless Kickstand WR1 Manuel De L'utilisateur page 13

Select Input Source
Your Kickstand WR1 can display media from a number of external sources. Press the
SOURCE button on either the projector or the remote and the "Source Select" menu
will be displayed. Press the SOURCE button repeatedly as needed to toggle through the
options – Android, HDMI, VGA, AV – until the desired mode is highlighted. Press the OK
button on the remote or the 3D button on the unit to select the source you'd like to use.
Or, you can use the wireless mouse as the main input device- instead of the remote.
Supported File Formats
Your Kickstand WR1 can display a wide range of file types. For a complete list of
compatible files, please review the "Technical Specifications" section on page X.
Projector Settings
It's easy to customize your Kickstand WR1! A few simple adjustments will have
everything finely tuned to meet your needs.
1. On the main Android media screen, highlight "Settings" and press OK on the
remote.
2. Use the UP and DOWN buttons on the DIRECTIONAL PAD to select the item you
want to adjust, then press OK to confirm your selection.
Note:Because your Kickstand WR1 is built on an Android platform, not all options will directly involve the projector
component of your Kickstand WR1, but taking time to familiarize yourself with your customization options can help
enhance your experience.
Categories available for adjustment are as follows:
Wireless & Networks:
• Refer to the "Connections and Playing" section on page X.
Device:
• USB – Refer to the "Connection and Playing" section on page X.
• Sound – Adjust the default volume and default notification sounds.
• Display – Adjust brightness and screen scale.
13