Troubleshooting
Sector selector switch 5) no longer
responds.
All lights are off on the housing 1).
Buttons 6), 8) or 10) do not change the
intensity of the illuminator.
Buttons 6), 8) or 10) do not change
between coarse / fine mode.
On/Off switches 7), 9) or 11) do not
work anymore.
For any other case, please contact us.
ma 356-042$24.docx
Disconnect the power supply 13), wait for at least 3
seconds and switch on the power again.
Power supply 3) is defective. You can order this
article : ALM-021462.
The knob is defective, the box 1) must be returned
to the factory.
Disconnect the power supply 13), wait for at least 3
seconds and switch on the power again.
The switch is defective, the box 1) must be returned
to the factory.
Tel: +41 (0)32 365 51 31
Fax: +41 (0)32 365 76 20
Email:
info@marcel-aubert-sa.ch
13