Turning The Fireplace Off - Remote; Turning The Fireplace Off - Display Panel - Empire Mantis FG28BM Manuel D'utilisation

Turning the Fireplace Off - Remote

When operating the fireplace using the remote, the fireplace can
be shut down by turning the thermostat temperature down (when
in thermostatic mode) or by pressing the power button on the re-
mote.
When the temperature setting is adjusted to turn off the fireplace,
the flame level will be gradually adjusted down until the fireplace
turns off.
When the remote power button is used, a single push will place
the fireplace into Standby Mode and the remote will display the
"PILOT" symbol.
PILOT
The burner will instantly go off, but the circulating blower will con-
tinue to operate until the fireplace cools off. A single push of the re-
mote's power button will exit the standby mode, return the remote
to the previous operating mode, and turn the fireplace back on.
Holding down the power button until the backlight turns off will also
turn off the remote and the fireplace.
Note: The time, date and room temperature will still be dis-
played on the remote display, but only weekly program-settings
will be changeable.
The burner will instantly go off, but the circulating blower will con-
tinue to operate until the fireplace cools off.
To turn the remote and fireplace back on, hold the power button
down until the remote's display panel backlight turns on again.
Page 12

Turning the Fireplace Off - Display Panel

To turn the fireplace off from the display panel, press the "Mode
Select" button on the fireplace display panel until the panel turns
off.
MODE
SELECT
REMOTE
MANUAL
OFF
FLAME
LEVEL
DISPLAY
Mantis
BACK LIGHT
The burner will instantly go off, but the circulating blower will con-
tinue to operate until the fireplace cools off.
UP
MANUAL
FLAME LEVEL
ADJUSTMENT
BLOWER
SPEED
DOWN
31794-1-0115