Trust Tomy Classic Notice D'emploi page 4

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 5
• FAULT FINDING
PROBLEM
POSSIBLE CAUSE
My Parent Unit will not
Mains power is not connected correctly.
switch ON.
Battery insertion and/or battery life issues.
My Baby Unit will not
Mains power is not connected correctly.
switch ON.
The Nightlight is active
The Nightlight is being operated
but I cannot connect
independently of the Baby Unit's
with the Parent Unit.
monitoring function (which is an
intended feature).
Parent Unit is making a
Parent and Baby Unit are too close.
high pitched (feedback)
noise.
There is a continuous
Loss of contact alarm.
beeping noise.
My Parent Unit emits 1
Low battery Parent Unit.
beep every minute
and the
button
flashes RED.
I cannot hear anything
Volume on Parent Unit is set too low.
through my Parent Unit.
Units are out of range.
And/or:
Units are set to Sound Activated
It's only intermittent.
Monitoring mode.
The sound quality has
The Parent and Baby Units are too
decreased.
far apart.
And/or:
The Parent Unit batteries are running
is becoming intermittent.
low.
GB
SOLUTION
Check the power cable connections (including wall
socket).
Check the batteries have adequate charge and are
correctly installed.
Check the power cable connections (including wall
socket).
Switch the Nightlight OFF by pressing the
button
then reactivate the Baby Unit's main function by
pressing the
button.
Move the Parent Unit at least 10m / 30ft away from
the Baby Unit.
Lower the volume of the Parent Unit.
Ensure both units are adequately powered.
Bring both units closer together and repeat the
'Set-Up' instructions.
Power the unit via the mains using the
adaptors supplied.
Replace the batteries.
Increase Parent Unit volume.
Move units closer.
Refer to Sound Activated Monitoring within this
instruction booklet.
Bring the units closer together avoiding enviromental
obstructions that maybe reducing your range.
Power the unit via the mains using the adaptors
supplied. Replace the Parent Unit batteries.
6
• PRÉSENTATION DE VOTRE ÉCOUTE-BÉBÉ
UNITÉ PARENT
PAGE
3
3
4
Affichage du niveau
sonore par diodes
Molette de réglage du volume
3
Entrée alimentation secteur CA
Marche/Arrêt
3
3
3
4
UNITÉ BÉBÉ
3
Activation au son
Interrupteur de
sélection du canal
Bouton MARCHE/ARRÊT
Marche/Arrêt de
la veilleuse
F
Interrupteur de sélection du canal
Socle/Clip ceinture
Entrée alimentation secteur CA
Microphone
Rangement du
cordon
7

Publicité

Table des Matières
loading

Table des Matières