ASROCK 880GMH/USB3 Mode D'emploi page 25

2.9 2.9 2.9 Driver Installation Guide Driver Installation Guide Driver Installation Guide
2.9 2.9 Driver Installation Guide Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive first. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom
side to install those required drivers. Therefore, the drivers you install can work
properly.
2.10 2.10 2.10 Installing Windows 2.10 2.10 Installing Windows Installing Windows Installing Windows Installing Windows
Vista Vista Vista 64-bit / XP / XP 64-bit With RAID Functions 64-bit / XP / XP 64-bit With RAID Functions 64-bit / XP / XP 64-bit With RAID Functions
Vista Vista TM TM 64-bit / XP / XP 64-bit With RAID Functions 64-bit / XP / XP 64-bit With RAID Functions
TM TM TM
If you want to install Windows
your SATA / SATAII HDDs with RAID functions, please refer to the document at the
following path in the Support CD for detailed procedures:
..\ RAID Installation Guide
2.11 2.11 2.11 2.11 2.11 Installing Windows Installing Windows Installing Windows Installing Windows Installing Windows
Vista Vista 64-bit / XP / XP 64-bit Without RAID Functions 64-bit / XP / XP 64-bit Without RAID Functions
Vista Vista Vista 64-bit / XP / XP 64-bit Without RAID Functions 64-bit / XP / XP 64-bit Without RAID Functions 64-bit / XP / XP 64-bit Without RAID Functions
TM TM TM TM TM
If you want to install Windows
on your SATA / SATAII HDDs without RAID functions, please follow below procedures
according to the OS you install.
2.11.1 Installing Windows 2.11.1 Installing Windows
2.11.1 Installing Windows 2.11.1 Installing Windows 2.11.1 Installing Windows
Functions Functions Functions Functions Functions
If you want to install Windows
RAID functions, please follow below steps.
Using SATA / SATAII HDDs without NCQ and Hot Plug functions (IDE mode)
STEP 1: Set up BIOS.
A. Enter BIOS SETUP UTILITY
Configuration.
B. Set the "SATA Operation Mode" option to [IDE].
STEP 2: Install Windows
ASRock
7 / 7 64-bit / Vista 7 / 7 64-bit / Vista 7 / 7 64-bit / Vista 7 / 7 64-bit / Vista 7 / 7 64-bit / Vista
® ® ® ® ®
® 7 / 7 64-bit / Vista TM / Vista
7 / 7 64-bit / Vista 7 / 7 64-bit / Vista 7 / 7 64-bit / Vista 7 / 7 64-bit / Vista 7 / 7 64-bit / Vista
® ® ® ® ®
® TM
7 / 7 64-bit / Vista / Vista
XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID
XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID
® ® ® ® ®
® XP / XP 64-bit on your SATA / SATAII HDDs without
Advanced screen
® XP / XP 64-bit OS on your system.
880GMH/USB3 Motherboard
/ / / / /
TM TM TM TM TM
TM 64-bit / XP / XP 64-bit on
/ / / / /
TM TM
TM TM TM
TM
64-bit / XP / XP 64-bit OS
Storage
2 5 2 5 2 5
2 5 2 5