Qlima ASE 1020 Mode D'emploi page 51

• IMPORTANT: never charge the battery at temperatures below 5°C or
above 40°C
• Take out the appliance and accessories from the packing box, check the
accessories and whether the appliance enclosure is well-found or not.
(picture 1 and 2)
• Loose the lock 2 and take the head part from the container 1.
• Attach the filter (ASE 1020: item B / ASZ 1010 item C / ASZ 1020 item
C+D) ASZB1018 item G set to the bottom of lid 3
• Put the lid 3 on the container 1 and use the lock 2 to fixate.
• Insert the nozzle 8 into the hose 7. Insert the other end of hose 7 into
air inlet connection 6.
• (ASZ1020 only): click the wheels 11 firmly to the bottom of the con-
tainer body 1. Make sure that wheels 11 are evenly spread (see picture
2 )
• The nozzle 8 end rectangular nozzle 10 (picture 1 & 2): are used to vac-
uum ash in the fireplace (picture 5)
• Type ASZ only: Insert the power cord plug in the wall socket.
• Type ASE only: connect the hose of your normal home dust vacuum
cleaner to suction connector 5 (picture 1). Connect your vacuum clean-
er to mains and switch it on.
• ASZB only: slide-push the battery into the slot
NOTE:
* the normal directions for use of your home dust vacuum cleaner re-
main applicable, the supplier of your ASE ash vacuum cleaner is not
responsible in any way for your home dust vacuum cleaner. No claims
can be made whatsoever.
* always make sure the ash vacuum cleaner filter is properly installed. As
otherwise your home dust vacuum cleaner might be damaged.
The Ash Vacuum cleaner is now ready to use.
BLOWING FUNCTION: ASZB 1018, ASZ 1010 AND ASZ 1020 ARE FEA-
TURED WITH A BLOWING FUNCTION:
• Put hose end 7 into the blower outlet connection 14. The air will now
blow through the nozzle.
NOTE
Take care when using blower function. Ashes and other residue are
blown away in an uncontrollable way!
51