Setting The Clock - Teac SR-LX5i Manuel Du Propriétaire

1 Press and hold the CLOCK ADJ button
for more than 3 seconds and release
it.
"12 HR" or "24 HR" blinks on the
display. If you want to change the hour
mode, press the . or / button.
< When no button is pressed for 8
seconds, the timer setting mode will be
cancelled.
2 Press the CLOCK ADJ button again.
The "hour" value blinks.
3 Press the Skip button (.//) to
set the current hour, and then press
the CLOCK ADJ button.
< Hold down the Skip button (. or
/) to adjust the clock continuously.

Setting the Clock

.// CLOCK
ADJ
4
Press the Skip buttons (.//) to
set the current minute, and then
press the CLOCK ADJ button.
The clock starts from 00 second.
5
Press the Skip buttons (.//) to
select Year, and then press the
CLOCK ADJ button.
6
Press the Skip buttons (.//) to
select Date, and then press the
CLOCK ADJ button.
To set daylight saving time
Press and hold the SLEEP/DST button
until the DST indicator (
the display.
To cancel, do the same operation again.
) appears on
11