XtremeMac SOMA BT Guide De L'utilisateur page 9

The Soma BT will also remember the paired unit
so that when it is close by, it will automatically
be paired.
5. Adjust the Volume using the Volume –
V or + W buttons.
6. If the external device is a phone and you receive
a call, the playing audio will mute. Press the
Bluetooth button U on the Soma BT and the
microphone on this unit will activate, and the
phone call will be heard through the Soma
BT. Make sure you now speak into the Soma
BT instead of your phone. If you do not want
to answer the call, press and hold the Bluetooth
button U for two seconds.
When done with the phone call, press the
Bluetooth button U again and the playing audio
will resume.
NOTE: If you use the actual phone to answer the
call, then the phone call will not be heard through
the Soma BT.
7. When connected
to an iPod, iPad or
iPhone, the battery
status will appear on
the device as shown on the right.
8. Turn the unit off when done to save battery
power.
Using the Soma BT with the Line In Jack
1. Turn on the unit as shown previously.
2. Connect the Line Out from the external unit
to the Line In jack on the Soma BT. Audio played
through the external device will now be heard
through the Soma BT.
3. Adjust the Volume using the Volume –
V or + W buttons.
4. Turn the unit off when done to save
battery power.
Imation Confidential - Use Only By Permission
Controlled material extracted from Matrix on Feb 21, 2012
06:29:49 PM CST [Bundled with Packaging Configuration 99-
0000-2015-8 A]
9