Sylvania SRCD838 Manuel D'instructions page 14

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

AUX IN:
1. Connected the external audio device to the unit by an audio
connection cable with 3.5mm stereo mini jacks (cable not
included) as:
~ Insert one end to the Phone; Line Out or AUX Out Jack on
the external audio device.
~ Insert the other end to the AUX IN jack on the front of unit.
3
AUX
Mobile Phone
Connect to the Phones;
AUX Out; Line Out Jack
of external audio devices
(Such like MP3 Player;
cell phone; iPod/iPad ... etc)
(Audio Connection Cable not included)
2. Turn the Power ON/OFF - VOLUME knob clockwise until a
"click" sound was heard to turn on the unit.
3. Turn the Function selector to the TAPE/AUX position.
4. Plays the music on the connected external audio device as usual.
5. When finished listening, turn the Power ON/OFF - VOLUME knob
counterclockwise until a "click" sound was heard to power off the
unit.
Notes:
Make sure the sound output level of the connected external audio
device is in high level.
Otherwise, sound will weak.
If sound is distortion, reduce the sound output level of the connected
external audio
device or set the EQ mode of it to normal.
Others Connection
2
5
VOLUME
AUX IN
1
To AUX IN Jac
k
on the unit
13
LINE OUT:
1. Connected the external audio device by an audio connection
cable with RCA plugs ( cable not included ) as:
~ Insert one end to the Line IN or AUX IN jacks on the external
audio Amplifier.
~ Insert the other end to the LINE OUT jacks on the rear of unit.
2. Turn the Power ON/OFF - VOLUME knob clockwise until a
"click" sound was heard to turn on the unit.
3. Plays the music/radio as previous procedures. Sound will hearing
from the connected external audio Amplifier system. Adjust the
volume level by the volume control on the connected external
Amplifier.
(If do not want to hearing the sound from this unit at the same time,
turn the Power ON/
OFF - VOLUME knob to minimum position).
4. When finished listening, turn the Power ON/OFF - VOLUME knob
counterclockwise until a "click" sound was heard to power off the unit.
Phones jack:
For private listening, connect a headphone / earphone (not included)
into the PHONE jack on the front of unit. The speakers will be
disconnected when headphone / earphone is inserted into
AC~120V 60Hz
(Connection Cable not included)
To the Line In/AUX In
jacks on the external
audio Amplifier
the jack.

Publicité

Table des Matières
loading

Table des Matières