Table des Matières
Publicité
'User Management' (!only accessible in 'admin' user level)
To add a user: enter a user name and password and select a user level in the right part of the screen.
Click "Assign" ; a popup will appear to ask for confirmation.
Click "OK" – the user will appear in the user list (left part of the main screen). This list contains all current accounts.
The maximum number of accounts is 16 ("root" not included).
To change a password or level: enter the user's name and the new password, and confirm the password.
Select the new user level and click "Assign."
For user 'root', only the password can be modified. Its user level is always 'Admin'.
To delete a user (user 'root' cannot be deleted ): choose the user in the dropdown list and click "Delete."
Click "OK," and wait for the program to delete the user.
To reload the current user list, click the 'Reload' button at the bottom of the 'Current User' list (scroll down).
5. FAQ
Q: Can I connect more than one CAMIP1 IP camera within a LAN?
A: Yes, as long as each CAMIP1 has its own unique IP address.
Q: How can I setup CAMIP1 along with other computers behind a gateway?
A: You need to do port-forwarding (default port number: 80) and DMZ setting for CAMIP1 and local pc's.
Q: How can I setup CAMIP1 if I only have dynamic IP connection?
A: You can obtain a public domain address from a free NAT (Network Address Translator) service on the Internet,
such as www.no-ip.com. It periodically updates your current IP address and you simply access to CAMIP1 by
entering this domain in your browser.
The information in this manual is subject to change without prior notice.
Dispose of this product in accordance with Local and National Disposal Regulations.
CAMIP1
6
Fig.13
VELLEMAN
Publicité
Table des Matières
