Vollrath STOELTING SCBA Série Manuel Du Propriétaire page 7

cylinder. Then remove the hexagonal joint (see figure 5).
4 Remove the gasket from its housing (see figure 6).
5 Disassemble the spigot by following the order given (see
figure 5
figure 6
figure 7).
6 Remove the drip tray and empty it.
7 Remove the flow restrictor from the bowl (see figure 8).
6. 4. 2 CLEANING
IMPORTANT
Do not wash any part of the machine in a dishwasher.
ATTENTION
Before any cleaning operation, always disconnect the
dispenser from the power source.
1 Pour about one gallon of 90-110 °F water and mild
detergent into a bucket, following the manufacturer's
instructions. A solution that is too strong can, in fact, damage
the parts to be washed, while a solution that is too diluted may
7
figure 7
figure 8