Installation And Connections; Installation - TAD -C2000 Manuel Du Propriétaire

INSTALLATION AND CONNECTIONS

Installation

WARNING
When installing, choose a level and flat surface that can sufficiently withstand the weight of this unit. Failure to do so
'
could cause the unit to fall, resulting in an accident.
It is recommended that the unit be installed directly on a solid floor surface. If installed on a shelf, the user is responsible
for confirming that the location is fully able to support the heavy weight of the amplifier.
To promote heat-emission, do not put objects on top of this unit or cover with a sheet (such as cloth or curtains) while
'
operating. Failure to do so could cause the unit to malfunction through abnormal heating.
This amplifier rests on three large main legs and two auxiliary legs. The two auxiliary legs are provided to prevent the unit
'
from suddenly striking the floor in the event that sudden weight is placed on the unit, but they do not contact the floor
under normal conditions.
CAUTION
To prevent interruption of cooling air flow to the unit, do not install it on carpets, rugs, or other soft materials, or in narrow
'
locations without sufficient surrounding clearance.
12

Leave 20 cm (0.66 ft.) open