Samsung HW-K950 Guide D'utilisation page 10

Adding the Soundbar to an Existing Multiroom Audio System
If the Samsung Multiroom app is already installed for use with another
multiroom audio device, follow these steps to add the Soundbar.
1. Press and hold the SPK ADD button on the bottom of the
Soundbar for more than 1 second.
• There is a notification sound and the message
"ADD SPEAKER" appears on the Soundbar's main unit.
Afterwards, the message "WIFI READY" appears when
standby-for-connection mode activates.
2. Connect your smart device (smart phone, tablet, etc.) to your
wireless router.
Internet
3. Launch the Samsung Multiroom app.
4. Touch to go to the list of all speakers.
5. Select More > Add New Speaker in the app, and then follow the instructions on the app screen.
Start screen
c To connect a different network, select No.
You must enter the password of your wireless router to connect your Soundbar to your wireless network
through the Samsung Multiroom app.
If your wireless router does not have a designated password, the app completes the initial settings without
asking you to enter a password.
Wireless Router
Complete the settings
by following the
instructions on the
Samsung Multiroom
app screen.
Selection of network
· 9 · English
Wi-Fi SETUP
AUX IN
DIGITAL AUDIO IN
(OPTICAL)
HDMI OUT
(TV-ARC)
HDMI IN 1
Wi-Fi SETUP SPK ADD
HDMI IN 2
Bottom of the Soundbar
Samsung
Multiroom
Smart Device
Speaker addition
complete
SPK ADD
DC 19V
SERVICE