Cleaning And Maintenance - wepump WEDIRT Mode D'emploi

Cleaning and maintenance

GB Risk of damage to the appliance!
Do not lift the pump with the cable or pressure hose as these are not designed for the
Attention!
tensile stress from the weight of the pump.
– Submerge the pump at an angle into the liquid to be delivered so that no air pocket forms on
the underside of the appliance. Suction would be prevented by this. Once the pump is sub-
merged, it can be righted again.
– Leave the pump on the bottom of the liquid container. Use a strong rope attached to the car-
rying handle of the pump for lowering.
– Tighten the end of the rope firmly after lowering.
The pump can also be operated while suspended on a rope.
Note:
For operation with rope:
Do not operate the pump without pressure hose.
Avoid the pump twisting around its longitudinal axis.
Operation
After the appliance has been connected to the mains power supply, the pump can working
Risk of damage to the appliance!
The float switch must be able to move so that the submersible pump cannot run dry.
Attention!
Cleaning and maintenance
Cleaning and maintenance overview
Before every use
W h a ? t
Check casing and cables for damage.
Check float switch for damage.
16
5
H o w ?
Visual inspection.
Lift and shake the switch to check the free
movement of the contained metal balls.
Q1300B101_01/1/2011