Battery Replacement; Replacing The Fuse - Seaward PV100 Notice D'utilisation

Solar Installation PV100

8.4 Battery Replacement

Before opening the Solar PV100 ensure that it is disconnected from all
voltage! Electric shock danger!
Power the unit off.
Disconnect all the test leads from the unit
Position the Solar PV100 face down and release the captive screw in the battery
compartment cover.
Remove the battery compartment cover.
Remove the discharged batteries from the compartment.
Fit a new set of alkaline batteries.
Relocate the battery cover over the battery compartment and fasten in position with the
battery cover captive screw.

8.5 Replacing the Fuse

Before opening the Solar PV100 ensure that it is disconnected from all
voltages!
Electric shock danger!
All replacement fuse types are specified for ratings and size on the
battery compartment cover on the rear of the Solar PV100.
Power the unit off.
Disconnect all the test leads from the unit.
Position the Solar PV100 face down and release the captive screw in the battery
compartment cover.
Remove the battery compartment cover.
Lift one end of the fuse out of the fuse holder with the help of a flat bladed screwdriver.
Lift the defective fuse completely out of the fuse holder.
Insert a new fuse as described and specified by the text on the battery compartment
cover.
- 18 -
Operating Instructions