Cleaning The Air Filter - Mitsubishi Electric JT-MC106G-W-NA Manuel D'instruction

Maintenance - Continuation
3
⚫ A dirty air fi lter will shorten the working life of the motor and heater and decrease the drying performance
Caution
due to insuffi cient air volume and air speed and bacteria can grow in the fi lter area due to dust deposits.
Front cover
Open
Air fi lter
Caution
⚫ Water may enter the unit and cause short
circuits, electric shocks or damage if the front
cover is left open.
Cleaning the air fi lter
Around once a week
Sensor
light
Sensor
switch
Air fi lter
1
Pull the tab, open the front cover and turn the
sensor switch "OFF".
⚫ The sensor light "OFF" is lit.
2
Remove the air fi lter.
3
Clean the air fi lter.
⚫ Tap it lightly or vacuum off the dust.
⚫ Wipe with lukewarm or cold water if it is extremely
unclean.
NOTE
⚫ After washing the air filter with water, dry it thoroughly.
Caution
⚫ Never dry the air filter with a heat source such as a hair
dryer.
4
Reattach the air fi lter.
⚫ Make sure that the air filter is fitted properly.
(Dirt and dust may get into the unit and shorten its
working life if the air fi lter is out of position.)
5
Turn the sensor switch "ON" and close the
front cover so that there is no gap and push
the tab.
⚫ The sensor light "ON" is lit.
− NA - 9 −