Error Codes - Grozone Control SCO2 Mode D'emploi

SCO2 Alarm and Error Meanings
Alarm/Error #
Error 1
Error 8
Factory Default Reset:
Disconnect the controller, push and hold the knob down while recon-
necting the controller:
been reset to factory settings.
12

ERROR CODES

ERROR CODES
Description
CO Sensor problem:
2
Turn power off and retry. If problem
persists, call Grozone Control at :
1-855-262-1800
or email at :
service@grozonecontrol.com
Memory corruption problem :
All settings have been reset to factory
settings. You need to go through the
entire menu and re-enter every
settings on your controller. If problem
persists, call Grozone Control at :
1-855-262-1800
or email at :
service@grozonecontrol.com
"rrrr"
will show on the display. All settings have
Displayed on
Screen
Er.1
Er.8
Alternately
with sensor
values