GYS PSW 6042U Mode D'emploi page 13

Translation of the original instructions
SECURITY MATTERS
• Do not handle the unit with wet hands or leave it within reach of children to prevent injury or electric shock.
• The temperature of the bodywork can be high due to a long use, it is necessary to let the product cool down before
handling it.
• Do not insert metal objects into the product to avoid electric shock.
• Do not expose the converter to moisture or liquids.
• When connecting to the battery, do not use a metal tool that could cause short circuits and damage the product.
• Avoid contact with battery acid and clean with clean water if necessary. In case of eye contact, consult a physician.
• If a malfunction occurs, disconnect the inverter immediately.
• Ensure that there is sufficient ventilation and that the air inlets and outlets of the unit are not blocked.
• Do not disassemble or modify the product.
• Do not short-circuit the cables after the unit has been completely shut down as this may damage the internal compo-
nents. The energy stored during use remains stored.
PROTECT FUNCTION AND RESTART WORK METHOD
Function
LED light
Input low Green : on
voltage alarm Red : off
Input low Green : on
voltage shut down Red : on
Input over Green : on
voltage protection Red : on
Over load Green : on
protection Red : on
Over temperature Green : on
shut down Red : on
Output short Green : on
circuit Red : off
WASTE DISPOSE
Please do not discard the products when it is useless, otherwise it will cause environmental pollution.
PSW
State description
alarm AC output
Alarm AC have output
No
No AC output
alarm
No
No AC output
alarm
No
No AC output
alarm
Alarm No AC output
No
No AC output
Alarm
Restart work method
When the voltage of the batter return to the
related voltage, alarm stop automatically.
When the voltage of the batter return to
the related voltage the inverter will restart
work, green light on, red light off.
When the voltage of the batter return to
the related voltage the inverter will restart
work, green light on, red light off.
Reduce the load to related rang the inverter
will restart work, green light on, red light off.
When the inside temperature return to rela-
ted rang, inverter will restart work, green
light on ,red light off.
When short circuit stopped, inverter restart
to work automatically.
EN
13