Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5.
Position the cooling set onto the re-
tention mechanism.
Hook one end of the clip to hook
first.
7.
Fasten down the lever.
Important
•
Mainboard photos shown in this section are for demonstration only. The appearance
of your mainboard may vary depending on the model you purchase.
While disconnecting the Safety Hook from the fixed bolt, it is necessary to keep an
•
eye on your fingers, because once the Safety Hook is disconnected from the fixed
bolt, the fixed lever will spring back instantly.
6.
Then press down the other end of the
clip to fasten the cooling set on the
top of the retention mechanism.
Locate the Fix Lever and lift up it.
8.
Attach the CPU Fan cable to the CPU
fan connector on the mainboard.
En-7
Publicité
Table des Matières
