In Case Of Difficulty - Clarion DVH940 Mode D'emploi

9. IN CASE OF DIFFICULTY

Problem
Nothing happens when
buttons are pressed.
No sound produced
from center speaker
16
DVH940
Cause
The microprocessor has
malfunctioned due to noise,
etc.
The source being played is
a 2-ch source lacking a
center channel (music CD,
linear PCM stereo, etc.).
Dolby Pro Logic II or DSF
is set to OFF.
The center speaker setting
is OFF (default setting is
ON).
Measure
Use a narrow stick to press the [RESET] switch on
the side of the 5.1ch surround decoder. Note that
when the [RESET] switch is pressed, all titles and
other data placed in memory will be erased.
5.1ch surround
decoder
Either choose one of the Dolby Pro Logic II modes,
or set DSF effect to ON (see P. 7).
Set center speaker (SP-SEL) to ON (see P. 8)
[RESET] switch