7. INSTALLATION
Installation Precautions
CAUTION!
• Install correctly, using only the screws
supplied as accessories. Using other
screws may result in damage or injury.
Installation Example (for installation beneath seat)
1. Use the supplied screws (M4x8) to attach the accessory mounting bracket to the sides of the unit.
• The main unit's case has been provided with 3 screw holes on either side. Select the screw
holes required for your installation conditions.
2. Position the unit on the floor mat, then mark and open holes in the floor mat so they are aligned
with the mounting bracket's holes.
3. Press the accessory canoe clips from the underside upward through the mat and into the mounting
bracket holes.
Mounting
screws
Canoe clips
Case
Mounting bracket
Case
Damage
8 mm max.
Mounting
bracket
Mounting
screws
Floor mat
Canoe clips
DVH940
13