Maintenance Of Your Homelight Epilator; Cleaning Your Homelight Epilator; Autonomy Of Your Homelight Epilator; Trouble Shooting - BaByliss Homelight 100 Mode D'emploi

7. Maintenance of your Homelight epilator

7.1. Cleaning your Homelight epilator

We recommend you clean your Homelight epilator after every session, particularly the application
surface.
Unplug your appliance before cleaning.
Gently clean the surface of the appliance and particularly the application surface with a clean, dry cloth
and a cleaning agent formulated for cleaning electronic equipment.
Never immerse your Homelight appliance or one of its parts in water.

7.2. Autonomy of your Homelight epilator

With an exceptionally long life, the Homelight epilator flash lamp releases all its light pulses without a decline
in energy.
When the appliance is at the end of its life, the 'ON/OFF/READY' indicator light will turn red.

8. Trouble shooting

8.1. My Homelight epilator won't start

Ensure the adapter is properly connected to your Homelight epilator and plugged into the mains.

8.2. There are no pulses when I press the release mechanism

Ensure that the application surface is evenly and firmly in contact with your skin and that the 'ON/OFF/READY'
indicator light is flashing; this indicator light guarantees that the appliance is in full contact with your skin. For your
safety, the release switch will be able to release a pulse only if the application surface is firmly pressed against
your skin.
Make sure the 'ON/OFF/READY' light is lit.
If after 10 seconds the 'Ready' light is still off, switch your Homelight epilator off and on again by pressing
the ' ' button twice.
If the problem persists, contact the BaByliss customer service in your area.
IB_G932-34E.indd 53
Do not use the unit if large stains appear inside the flash lamp or if the application
surface is broken. Contact the BaByliss customer service.
53
5/13/14 1:02 PM