dji RONIN-SC FOCUS MOTOR Guide De L'utilisateur page 8

• To loosen the gear strip, push the gear strip outward
EN
while holding the belt holder tightly. DO NOT pull
out the gear strip forcibly or the gear strip may be
damaged.
• Trim the gear strip to the required length, leaving
enough for adjustments (if needed).
6. After mounting the camera dovetail plate and lens support
to the camera, attach the camera to Ronin-SC. Connect the
camera, Ronin-SC, and Focus motor according to the figure
below.
6
Connect to Ronin-SC
Camera Control Port
Connect
to Camera
Connect to Focus
Motor Port
Usage
Control the focus motor by using the focus wheel after
powering on Ronin-SC.