Table des Matières
Publicité
3. Attach the camera riser with the rod mount to the bottom of
the camera.
4. Attach the focus motor to the 12 mm rod.
• The focus motor can be mounted on either side of
the camera. Make sure the focus motor is mounted
firmly.
5. If the camera does not have a lens focus ring with a 0.8
m gear, attach the provided gear strip to the camera lens to
use the focus motor.
a. Be sure the teeth of the gear strip are facing outward.
Line up the gear strip on the focus ring or the zoom ring
on the lens and pull it taut.
b. Press the gear strip into the belt holder while holding it
tightly. Make sure the gear strip is securely in place in the
belt holder.
EN
Belt Holder
5
Publicité
Table des Matières
