Door Glass Removal - Continental Fireplaces CEFVC32H Manuel D'installation

3.4

door glass removal

1. Remove the retainer bracket by removing the 2 screws (Fig. 1 and 2). Set the screws aside; keep the bracket
on-hand for Step 2.
2. For ease of removal, use the bracket hooks to reach behind
the glass and pull it forward (Fig. 3).
CAUTION:
Using the bracket this way is only recommended for
ease of removal. When installing the bracket, hooks
must ALWAYS face toward the front of the appliance
(see "door glass installation" section). Failure to comply
with these instructions could create a fire hazard.
3. Remove the glass and place it on a soft, non-abrasive surface.
Some components
hidden for clarity
Fig. 1
finishing
Fig. 2
Fig. 3
Glass
Bracket hook
W415-1831 / D / 01.07.19
EN
17