Upgrading Agp Screen Controllers - Fujitsu Siemens Computers D1627/25 Mode D'emploi

Installing a memory module
2
Ê
Push the holders on each side of the memory slot outwards.
Ê
Insert the memory module into the location (1).
Ê
At the same time flip the lateral holders upwards until the memory module snaps in place (2).
Removing a memory module
1
Ê
Push the clips on the right and left of the memory slot outward (1).
Ê
Pull the memory module out of the memory slot (2).

Upgrading AGP screen controllers

Technical data:
The AGP slot supports the modes 4x/8x with 32 bits and 66 MHz. Only 1.5 V AGP graphics cards
are supported.
Some older 3.3 V AGP graphics cards are coded like 1.5 V AGP graphics cards. The
i
installation of such 3.3 V AGP graphics cards can cause serious damage to the
mainboard and the AGP graphics cards.
A26361-D1627-Z120-1-6319
Upgrading AGP screen controllers
2
1
English - 21