Panasonic EY7881 Instructions D'utilisation page 21

VIII. SPECIFICATIONS
NOTE: Weight indication
Greater than or equal to 1 kg: indicated by 0.05 kg.
Less than 1 kg:
MAIN UNIT
Maximum Drilling Diameter
Motor Voltage
Speed At No Load (RPM)
Blows Rate Per Minute
(BPM)
Weight
(with battery pack: EY9L84)
Overall length
Noise, Vibration
BATTERY PACK
Model No.
Storage battery
voltage
Battery
detail spec.
BATTERY CHARGER
Model
Electrical rating
Weight
Charging time
NOTE: This chart may include models that are not available in your area.
Please refer to the latest general catalogue.
IX. APPENDIX
WARRANTY SUPPLEMENT
• The breakdown and damage caused by usage consistent for a long time (e.g.: factory
work on the assembly line, etc.) is out of warranty.
indicated by 0.01 kg.
ɸ 28 mm
Concrete
ɸ 50 mm (Metal hole saw)
Steel
ɸ 33 mm
Wood
28.8 V DC
Low Mode 0 – 560 min
Middle Mode 0 – 680 min
High Mode 0 – 840 min
Low Mode 0 – 2950 min
Middle Mode 0 – 3600 min
High Mode 0 – 4400 min
3.85 kg
368 mm
See the included sheet
EY9L82
3.6 V × 16 cells
See the rating plate on the bottom of the charger.
EY9L82
Usable: 60 min
Full: 80 min
- 21 -
(rpm)
-1
(rpm)
-1
(rpm)
-1
(bpm)
-1
(bpm)
-1
(bpm)
-1
EY9L84
Li-ion Battery
DC 28.8 V
3.6 V × 8 cells
EY0L82
0.93 kg
EY9L84
Usable: 60 min
Full: 90 min
EN