Sunred RSS16 Manuel page 3

IMPORTANT – Carefully remove any packaging before use, but retain the safety instructions.
These instructions are part of the product.
Please take note of all the safety warnings listed in these instructions.
Please read these instructions in their entirety and retain them for future reference.
These instructions should be stored with the product.
Unpack the halogen heater, making sure that all the items are present and that there are no components left in
the box and that the heater head is free from any packaging material.
Using the detailed drawing, follow the steps to assemble your heater.
Do not connect the heater to the electrical supply until all the assembly is complete.
Do not connect the heater to the electrical supply if any of the components or the power cord is damaged in
any way. If in doubt contact your supplier.
Caution
Only use the heater on a firm, solid and horizontal surface with the base securely in contact with the floor. The heater is
fitted with an automatic turn off-switch in case the heater tilts or falls over.
1. Place the heater outside or in a large open area and well away from any obstructions such as branches or from
objects that can be affected by heat, such as furniture, curtains or other inflammable objects (minimum distance
1 meter).
2. Do not use near bath tubs, washing areas or swimming pools.
3. Do not use in unventilated areas.
4. Do not use where gas, petrol, paint or other inflammable goods are stored.
5. Do not push any items through, obstruct or cover the grill of the heater head.
6. Do not position immediately above or below an electrical socket.
7. Do not move when connected to an electrical supply and always wait for the patio heater to cool down before
storing away.
8. Do not touch the heater head when in use.
9. Do not leave turned on and unattended especially when children and/or animals are in the vicinity.
10. The indication of the different positions of switches must be visible from a distance of 1m.
11. The marking concerning covering must be visible after the heater has been installed. It shall not be placed on
the back of the heater.
12. The unit must be correctly installed according to the instructions.
13. The unit must be securely placed on a horizontal and flat surface.
14. The unit is at high temperature during operation. It keeps hot for a period after shut down. Do not touch it during
this period.
15. Do not place the unit close to curtains and/or other flammable objects. Otherwise there will be a danger of
catching fire.
16. Do not cover the unit with anything during operation or a short time after it has been shut down.
17. Do not wrap the power supply cord around the unit.
18. The unit must be handled with care. Avoid vibration or impact.
19. The unit must be securely grounded during operation.
20. If the unit gets damaged, it must be repaired by a professional electrician.
21. When the power supply cord is damaged, it must be replaced by an authorized agent or other professionals to
avoid danger.
22. The unit must not be positioned under a socket.
23. When assembling, keep clear from any board or flammable material.
24. The unit must be supervised by adults if it is used by a child.
25. It is not safe to install the unit by a swimming pool, in a bathroom or shower area.
26. The unit is for household use only. It is not safe to use on a building site, greenhouse, barn or stable where there
is flammable dust.
27. The head of the unit is at high temperature during operation. Unplug the unit and wait until it cools down before
cleaning.
28. Do not use this unit in place where causticity or volatile air exists, i.e. dust, steam, gas, etc.
29. Do not use this unit as a cloth drier or towel drier.
30. Do not use this unit as a sauna heater.
31. Do not use this unit as a room heater.
32. Do not use this unit in place of animal propagating and raising.
33. Do not immerse this unit into water for cleaning.
34. The unit should be plugged in a socket, which is easily visible and reachable.
www.sunred.nl