Functional Inspection - Direct Healthcare Group SystemRoMedic StandingVest Manuel Utilisateur

StandingVest
Instructions for use – English
SystemRoMedic
TM
Max load: 300kg/660lbs
StandingVest is specially designed for lifting with a standing shell. For the caregiver, it is easy to apply and it gives
the patient a feeling of security. It is designed to provide upper-body support and is held in place by leg harness
at the groin. StandingVest is designed to activate the patient safely and comfortably.
SystemRoMedic includes a wide range of functional, comfortable, high-quality slings that can be adapted for
different types of lifting and for patients with different needs. The choice of model and material depends on the
patient's needs and the transfer situation.

Functional inspection

Visual and mechanical inspection
Check the condition and function of the sling regularly. Always inspect the product after laundering. Check to ensure
that seams and material are free from damage. Check to ensure that fabric is not worn or faded. Apply load to the
device and check to ensure that clasps, handles, etc. withstand heavy load. If there are signs of wear, the product
must be discarded.
Always read the manual
Always read the manuals for all assistive devices used during a transfer.
Keep the manual where it is accessible to users of the product.
Do not leave the patient unattended during a transfer situation.
To prevent discomfort and the risk of the patient sliding out of the sling, trial fit the sling carefully. First, apply the
sling's back loops to the slingbar, and then apply the leg support loops. Use a slingbar that has been tested.
The lowest allowable safe working load always determines the safe working load of the assembled system.
Always check the safe working loads for the lift and accessories before use.
Contact your dealer if you have any questions.
SystemRoMedic M A N U A L 3
TM