Sony PCGA-BM1 Mode D'emploi page 7

5
Double-click "USB (Universal Serial Bus) Controller" to show
the lower hierarchic levels, and double-click "USB Bluetooth
Driver (CSR)".
The "USB Bluetooth Driver (CSR) Properties" dialog box appears.
6
Select the "Driver" tab and click the "Update Driver" button.
The "Upgrade Device Driver Wizard" dialog box appears.
7
Click the "Next" button.
The "Install Hardware Device Driver" dialog box appears.
8
Select "Display a list of the known drivers for this device so
that I can choose a specific driver", and click "Next".
The "Select Device Driver" dialog box appears.
9
Insert the Utility CD-ROM into the CD-ROM drive of the
notebook.
10
Click the "Have Disk" button.
The "Install from Disk" dialog box appears.
11
Click the "Browse" button to open the "Locate" dialog box.
Select the "Bluetooth" folder on the CD-ROM drive, and click
the "Open" button.
z Hint
Instead of the above procedure, you can also enter "E*:\Bluetooth" in the "Copy
manufacturer's file from:" field.
* E may also be another drive name.
12
Click the "OK" button.
The "Install from Disk" dialog box closes and the display returns to the
"Select a Device Driver" dialog box.
13
Verify that "USB Bluetooth Driver (CSR)" is shown in the
"Models" list, and click the "Next" button.
The "Start Device Driver Installation" dialog box appears.
Continued on next page
GB
7